Search

This study aims to predict human exposure to pollutants and heating load in buildings by developing a numerical model coupling heat and chemical transfers in the building envelope. The study characterizes the effect of temperature and air renewal rate on chemical emissions from building materials and human exposure. The results show that increasing indoor temperature by 10°C doubles the maximum indoor air concentration of volatile and semi-volatile organic compounds, leading to increased human exposure. The study also finds that higher air renewal rates lead to smaller intake fractions of pollutants from building materials. The study highlights the need to guide early design choices towards a good compromise between human indoor exposure and heating load, especially with the increasing emphasis on energy-efficient building design.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

The study examines the near-field exposures and health risks of organic chemicals in interior paints commonly used in Sri Lanka. The researchers developed mass balance-based and high-throughput models to predict chemical emissions during wet and dry phases and integrated these models into the USEtox model for health risk assessment. The models accurately predicted indoor air concentrations and drying time. They found that inhalation is the primary exposure pathway, and exposure is much higher for painters during application than for household members during use. The study identified chemicals of concern and recommended the use of protective equipment for painters and increasing air ventilation rates to reduce exposure for household members.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

At face value, cabinetry may seem to be made of one type of wood, but its construction is much more complex. Many prefabricated cabinets are built using a combination of three or more wood composites and veneers, which typically use toxic glues containing formaldehyde, a known human carcinogen.

By comparing the material contents and construction in prefabricated cabinets, we created a spectrum that indicates the relationship between affordability and health. We typically consider the health effects during all phases of product development, but these diagrams are focused on the health effects during installation and inhabitation.

Currently, prefabricated cabinets are composed of 5%-30% healthier materials. Designers can increase this percentage by requesting manufacturers to build with NAF (no added formaldehyde) composite woods. This often comes with an increased price. Our Composite Wood Product and Spec Guidance gives a range of healthier substitutions.

This guidance document aims to give an overview of potential hazardous substances that might occur in construction products and when appearing as waste need attention during renovation and demolition activities. Focus in this guideline is on hazardous substances regulated by EU or international agreements or national legislation.

Although the present legislation restricts the use of many hazardous substances in new building products, there is a considerable concern for compounds present in old construction products, since their presence in construction and demolition waste may limit the recyclability of the material and potentially cause waste management problems. One group of substances that has recently received attention are persistent organic pollutants (POP substances) such as e.g. some brominated flame retardants.

Important characteristic of the construction and building products is the relatively long life span. Because of long lifespan the restricted substances will enter the waste stream many decades after a ban has been placed on their use and they can therefore be found in renovation or demolition waste for a long time. Many of these substances provide important functionality in a wide range of products, e.g. flame retardants.

Besides hazardous substances also degradation in composition and quality aspects (e.g. mould) of construction products needs to be considered.

This document is part of the pre-demolition overall guidance document developed in the PARADE project.

Buyer’s guide from Havard University for specifying furniture and materials free from flame retardants in university procurement

Green public procurement specification for general construction and flooring adhesives. The goal of the specification is to set to set a hierarchy of flooring covering preferences, establish minimum environmental goals for flooring installations in state properties, and provide recommendations for additional aspects of flooring performance, cleaning and maintenance for a healthier indoor environment.

Tarkett have introduced an eco-innovation programme with the aim of providing more comfortable, healthy and people-friendly indoor spaces without compromising performance and design experience. Key initiatives include:

• Phthalate free technology in their New Generation Vinyl flooring;
• Low VOC emissions in flooring;
• ReStart Takeback and Recycling Programme, and use of recycled materials in new products.