Library

Abstract: Based on a review of 2012 and 2016 data in the Nordic chemical database, SPIN, this paper is an assessment of the usage of REACH’s Substances of Very High Concern (SVHC) and Denmark’s List over Undesirable Substances (LOUS) chemicals in the building industry in Denmark. The paper is a status update of the 2016 Danish Environmental Agency’s report of the usage of hazardous substances in sustainable buildings, based on 2012 data from SPIN. The analysis focuses on change in tonnage of usage of chemicals found in twelve different construction product categories in SPIN, crosschecked with substances from the SVHC and the LOUS lists. The usage of some hazardous substances in certain usage categories has reduced from 2012 to 2016.

There is an overall trend indicating an increase of undesirable chemical in construction articles and preparations, which poses serious challenges for a functioning circular built environment. Findings indicate which construction categories and which chemicals are of particular concern for the current construction market in Denmark. The results underscore the essential need for transparency in building product content, in order for design professionals and contractors to make decisions that support the future use of the material or building element.

This study, commissioned by DG Environment for the European Commission and produced by Wood and Ramboll.  The objective was to assess the use of PFASs and fluorine-free alternatives in textiles, upholstry, carpets, leather and apparel, including specific focus on volumes of use, technical function, and emissions.

Non-fluorine alternatives considered were hydrocarbons, silicones, dendrimers, polyurethane, nanomaterials, and alternative technologies.  The study makes recommendations for policy, including a REACH restriction on the placing on the market and use of these products that contain any PFAS, and a listing under the Stockholm Convention.  It is also recommended in the report that a restriction could be combined with voluntary industry measures and provisions in public procurement to encourage substitution of PFAS before mandatory legislation is introduced.

This study aims to predict human exposure to pollutants and heating load in buildings by developing a numerical model coupling heat and chemical transfers in the building envelope. The study characterizes the effect of temperature and air renewal rate on chemical emissions from building materials and human exposure. The results show that increasing indoor temperature by 10°C doubles the maximum indoor air concentration of volatile and semi-volatile organic compounds, leading to increased human exposure. The study also finds that higher air renewal rates lead to smaller intake fractions of pollutants from building materials. The study highlights the need to guide early design choices towards a good compromise between human indoor exposure and heating load, especially with the increasing emphasis on energy-efficient building design.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

The study examines the near-field exposures and health risks of organic chemicals in interior paints commonly used in Sri Lanka. The researchers developed mass balance-based and high-throughput models to predict chemical emissions during wet and dry phases and integrated these models into the USEtox model for health risk assessment. The models accurately predicted indoor air concentrations and drying time. They found that inhalation is the primary exposure pathway, and exposure is much higher for painters during application than for household members during use. The study identified chemicals of concern and recommended the use of protective equipment for painters and increasing air ventilation rates to reduce exposure for household members.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

This guidance document aims to give an overview of potential hazardous substances that might occur in construction products and when appearing as waste need attention during renovation and demolition activities. Focus in this guideline is on hazardous substances regulated by EU or international agreements or national legislation.

Although the present legislation restricts the use of many hazardous substances in new building products, there is a considerable concern for compounds present in old construction products, since their presence in construction and demolition waste may limit the recyclability of the material and potentially cause waste management problems. One group of substances that has recently received attention are persistent organic pollutants (POP substances) such as e.g. some brominated flame retardants.

Important characteristic of the construction and building products is the relatively long life span. Because of long lifespan the restricted substances will enter the waste stream many decades after a ban has been placed on their use and they can therefore be found in renovation or demolition waste for a long time. Many of these substances provide important functionality in a wide range of products, e.g. flame retardants.

Besides hazardous substances also degradation in composition and quality aspects (e.g. mould) of construction products needs to be considered.

This document is part of the pre-demolition overall guidance document developed in the PARADE project.