98 resources found

Report

Addressing the Issue of Chemicals of Concern in Electronics: Challenges and recommendations for labelling initiatives

by |
January 2022
copied to clipboard
Chemicals provide a variety of specific functions in electric and electronic products or in their manufacturing process. However, some of these chemicals are hazardous and can cause concern related to their potential for adverse impacts on human health and the environment. Such impacts can occur throughout the product’s life cycle, including raw material extraction, processing and manufacturing, but also during product use or at end-of-life. However, decisions influencing product ingredients are usually taken at upstream stages of the value chain
Emerging Policy Issues: Chemicals in products
Factsheets and brochures

Addressing Chemicals of Concern in Electrical and Electronic Equipment - Options for Action for Policymakers

by |
December 2021
copied to clipboard
The global production and consumption of Electrical and Electronic Equipment (EEE) is growing rapidly and EEE has become indispensable in modern societies, enhancing living standards. Currently, the total weight of global EEE consumption (excluding photovoltaic panels) on average increases by 2.5 million metric tons annually. This increasing consumption and production leads to an increase in raw material extraction and accompanying pollution.The options for action proposed in this document are intended to inspire policymakers and to offer guidance on possible entry
Emerging Policy Issues: Chemicals in products
Report

Fluorochemicals: Persistent, Dangerous, Avoidable

by |
December 2021
copied to clipboard
PFAS are non-aromatic, organic chemicals in which the hydrogen atoms in the carbon chain are fully replaced (“per”) or partly but almost entirely replaced (“poly”) by fluorine atoms. At least 4,700 substances belong to this group of substances. All these chemicals have in common that their environmental degradability is fairly slow and very limited and therefore remain resistant for years to decades.PFAS are “forever chemicals.” Even when being incinerated for disposal, very high temperatures are required for these compounds to
Emerging Policy Issues: Chemicals in products
Report

Towards a Circular Economy for the Electronics Sector in Africa: Overview, Actions and Recommendations

by |
December 2021
copied to clipboard

This report provides an overview of the current state of circularity in the electronics value chain in Africa, identifies key areas of concern, provides appropriate recommendations, and proposes priority actions to improve circularity of the sector.The recommendations focus on the individual life cycle stages of the electronics value chain, as well as on aspects that cut across the value chain. The transition towards a more circular electronics sector in Africa would require a holistic, coordinated approach bridging five key areas

Report

A Chemicals Perspective on Designing with Sustainable Plastics: Goals, Considerations and Trade-offs

by |
December 2021
copied to clipboard
The development of plastic products does not systematically take sustainability, particularly from a chemicals perspective, into account. This report seeks to enable the creation of inherently sustainable plastic products by integrating sustainable chemistry thinking in the design process. By applying a chemicals lens during the plastic material selection process, designers and engineers can make informed decisions to incorporate sustainable plastic during the conceptualisation phase of their products. The report provides an integrated approach to sustainable plastic selection from a chemicals
Emerging Policy Issues: Chemicals in products
Topics: Life Cycle
Report

Sustainable Building Finance: Supporting green mortgage development in Sri Lanka

by |
December 2021
copied to clipboard
A GEF-funded (Global Environment Facility) project on “Global best practices on emerging chemical policy issues of concern under SAICM” was launched in 2019, targeting Sri Lanka amongst other countries. The activities under the project include a focus on tracking and controlling chemicals along the value chains of the building and construction sector. To that end, a team from the UN Environment Programme (UNEP) have been working with stakeholders in Sri Lanka on identifying chemicals of concern in the construction material
Report

Evaluation of Tools and Models Used for Assessing Environmental Exposure to Manufactured Nanomaterials

by |
November 2021
copied to clipboard
Scientific knowledge to assess the exposure to nanomaterials continues to improve. The OECD compiled an inventory of available models and tools for assessing occupational, consumer and environmental exposure to Nanomaterials. 54 tools and models were initially compiled and following in-depth analyses, 10 occupational, 7 consumer and 6 environmental tools/models were recommended or evaluated as suitable for assessing exposure to nanomaterials. The detailed information on the analyses and evaluations are provided in the reports accessible from the Series on Nanomaterials website
Emerging Policy Issues: Nanotechnology Chemicals in products
Factsheets and brochures

Using a value chain approach to reduce chemicals of concern

by |
October 2021
copied to clipboard
Chemicals of concern (CoCs) contained in everyday products can have harmful impacts on human health and the environment. While chemical-related impacts can often occur during a product’s use or end-of-life, decisions influencing product ingredients are taken further upstream of the value chain. Action to address CoCs in products thus need to consider the entire value chain and impactful interventions need to be made at upstream stages to protect human health and the environment from chemical pollution. UNEP is working on
Avatar