67 resources found

Circular_Economy_Electronics_LAC
Report

Toward a Circular Economy for the Electronics Sector in Latin America and the Caribbean (LAC): Overview, Actions and Recommendations

This report provides an overview of the current status and conditions of the Circular Economy in the electronics value chain in the Latin America and the Caribbean (LAC) region, identifies key areas of concern, provides appropriate recommendations, and proposes priority actions to improve circularity of the sector. The recommendations and roadmap focus on the individual life cycle stages of the electronics value chain, as well as on aspects that cut across the value chain. The transition towards a more circular electronics sector in Latin America and the Caribbean (LAC) would require a holistic and coordinated approach to progress toward a more circular electronics value chain in the CEE region.

This publication was prepared under the framework of the Global Environment Facility (GEF) full-sized project 9771: Global best practices on emerging chemical policy issues of concern under the Strategic Approach to International Chemicals Management (SAICM). This project is funded by the GEF, implemented by UNEP and executed by the SAICM Secretariat.

SAICM-USEtox_D8.1-Paper3-preprint
Academic article

Coupled mass and heat transfer modeling in building envelopes to consistently assess human exposure and energy performance in indoor environments

This study aims to predict human exposure to pollutants and heating load in buildings by developing a numerical model coupling heat and chemical transfers in the building envelope. The study characterizes the effect of temperature and air renewal rate on chemical emissions from building materials and human exposure. The results show that increasing indoor temperature by 10°C doubles the maximum indoor air concentration of volatile and semi-volatile organic compounds, leading to increased human exposure. The study also finds that higher air renewal rates lead to smaller intake fractions of pollutants from building materials. The study highlights the need to guide early design choices towards a good compromise between human indoor exposure and heating load, especially with the increasing emphasis on energy-efficient building design.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

Emerging Policy Issues: Chemicals in products
SAICM-USEtox_D8.1-Paper6-preprint
Academic article

Near-Field Exposures and Human Health Risks for Organic Chemicals in Interior Paints

The study examines the near-field exposures and health risks of organic chemicals in interior paints commonly used in Sri Lanka. The researchers developed mass balance-based and high-throughput models to predict chemical emissions during wet and dry phases and integrated these models into the USEtox model for health risk assessment. The models accurately predicted indoor air concentrations and drying time. They found that inhalation is the primary exposure pathway, and exposure is much higher for painters during application than for household members during use. The study identified chemicals of concern and recommended the use of protective equipment for painters and increasing air ventilation rates to reduce exposure for household members.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

Emerging Policy Issues: Chemicals in products
Case Study 1
Case studies

Gaining legal ground in the Extended Producer Responsibility scheme for electronics in Nigeria

by |
March 2023
copied to clipboard

Strengthening legal efforts in Nigeria is crucial for successful implementation of Extended Producer Responsibility (EPR) systems. By having the National Environmental Standards and Regulations Enforcement Agency of Nigeria (NESREA) having the enforcing EPR laws create a more sustainable and accountable e-waste sector.

Developing and updating EPR legistlations helps clarify the different responsibilities and enforce producers to comply with their obligations and responsibility. However, effective EPR implementation will require further law enforcement measures.
The case study outlines two achievements of the "Circular Economy Approaches for The Electronics Sector In Nigeria" project towards establishing a stronger legal system in Nigeria:

  • The development and gazette of the EPR Guidance document in 2020: the guidance defines the roles and responsibilities of the key public and private stakeholders, the product categories to be covered by the EPR scheme, and the collection and recycling targets.
  • The amendment of the National Environmental (Electrical and Electronic Sector) Regulations in 2022: which legally requires EPR subscriptions and prohibits suboptimal treatment of e-waste.

The study concludes with a summary of key lessons and next steps, emphasizing the importance of enforcing EPR laws, engaging stakeholders, raising public awareness, and collaborating with regional and international partners.

Case Study 2
Case studies

Data management automation for the Extended Producer Responsibility scheme for electronics in Nigeria

by |
March 2023
copied to clipboard

The establishment of an EPR database is critical in operationalising and formalising the management of EPR-related data. The EPR database allows e-waste flow tracking and EPR fee and recovery rate calculation while ensuring producers' information confidentiality and helping prevent counterfeiting activities.

The case study outlines the project’s efforts towards establishing this automation system in Nigeria in the following areas:

  • Developing the EPR database: to manage producers’ market share data, calculate and collect the EPR fees.
  • Registering Producers and products in the database: To ensure electronic and electrical producers are registered and to oversee the EPR operation.
  • Securing the database: Enhancing producers' trust in the database and ensuring its confidentiality.

The study concludes with a summary of next steps and key learnings, emphasizing the importance of law enforcement, database registration, secure systems for producers, and encouraging the participation of producers in the database registration.

Avatar