Library

This case study highlights three main achievements resulting from the EPR pilot that tested potential collection channels, determined local e-waste treatment costs, and promoted environmentally sound e-waste management and gender equality in Nigeria's electronics sector.

1. Setting an EPR financial mechanism by understanding local collection and recycling costs and estimating the EPR fee based on local costs.
2. Reducing the health and environmental risks associated with e-waste management practices by ensuring hazardous materials like mercury and Persistent Organic Pollutants in e-waste are recycled in an environmentally sound manner.
3. Improving the health, security, and safety of waste management workers, including women who face various risks in the sector.

The study concludes with a summary of the next steps and key learnings that emphasize the importance of environ-mentally and socially responsible e-waste management with a focus on gender equality in the sector.

A case study as part of the European Commission's Green Public Procurement resources.  This example from Denmark shows how by using an overarching, centralised procurement strategy across more than 60 municipalities, the Danish government were able to address sustainability hotspots from wooden furniture, by bulk procurement of products that met ambitious sustainability criteria.

The bulk sourcing enabled cost savings, and criteria set ensured that furniture did not contain chemicals of concern identified by both Danish restricted substance lists and the REACH list of substances of very high concern (SVHC).  Products were required to meet higher standards of chemical safety, with dismantling criteria also set to improve circularity.

In recent years the majority of glues used in wood composite boards have been urea-formaldehyde (UF) and phenol-formaldehyde (PF) resins.  However, these products may cause human health issues due to off-gassing of formaldehyde, which is recognised by the World Health Organisation as a potential human carcinogen, which can also cause irritation of the eyes, nose, lungs and throat.

However, development of no-added formaldehyde (NAF) glues and resins is a growing area, which not only provide a safer indoor environment, but also can reduce the use of fossil-based feedstocks, and are biodegradable.  This case study looks at how NAF adhesives based on abundant soybean feedstocks, taking inspiration from processes in nature can address this chemical hotspot, and how the product was intially researched by Dr. Kaichang Li of Oregon State university, and came to market through collaborations with Columbia Forest Products and Hercules.  Soy-based adhesives can now demonstrate cost-competitiveness with UF adhesives, and are being widely procured for buildings seeking to achieve complaince with air quality regulations and higher building rating scores.

This study aims to predict human exposure to pollutants and heating load in buildings by developing a numerical model coupling heat and chemical transfers in the building envelope. The study characterizes the effect of temperature and air renewal rate on chemical emissions from building materials and human exposure. The results show that increasing indoor temperature by 10°C doubles the maximum indoor air concentration of volatile and semi-volatile organic compounds, leading to increased human exposure. The study also finds that higher air renewal rates lead to smaller intake fractions of pollutants from building materials. The study highlights the need to guide early design choices towards a good compromise between human indoor exposure and heating load, especially with the increasing emphasis on energy-efficient building design.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

Chemical management and risk assessment frameworks rely on regulatory toxicity values, but these are available for only a small fraction of commercialized chemicals due to limited available data. To address this gap, the study aims to expand the coverage of chemicals for which toxicity values can be derived by determining surrogate inhalation route points of departure (PODs) and corresponding toxicity values where regulatory assessments are lacking. In vivo data from the U.S. EPA's Toxicity Value Database were curated and selected, and effect values were adjusted to chronic human equivalent benchmark concentrations (BMC_h) using the WHO/IPCS framework. Chemical-specific PODs are crucial for evaluating potential risks and toxicological impacts from chemical exposures, and the statistically derived BMCL or LOAEC/NOAEC are typically used as candidate PODs for toxicity value derivation.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

The study examines the near-field exposures and health risks of organic chemicals in interior paints commonly used in Sri Lanka. The researchers developed mass balance-based and high-throughput models to predict chemical emissions during wet and dry phases and integrated these models into the USEtox model for health risk assessment. The models accurately predicted indoor air concentrations and drying time. They found that inhalation is the primary exposure pathway, and exposure is much higher for painters during application than for household members during use. The study identified chemicals of concern and recommended the use of protective equipment for painters and increasing air ventilation rates to reduce exposure for household members.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

Strengthening legal efforts in Nigeria is crucial for successful implementation of Extended Producer Responsibility (EPR) systems. By having the National Environmental Standards and Regulations Enforcement Agency of Nigeria (NESREA) having the enforcing EPR laws create a more sustainable and accountable e-waste sector.

Developing and updating EPR legistlations helps clarify the different responsibilities and enforce producers to comply with their obligations and responsibility. However, effective EPR implementation will require further law enforcement measures.
The case study outlines two achievements of the "Circular Economy Approaches for The Electronics Sector In Nigeria" project towards establishing a stronger legal system in Nigeria:

• The development and gazette of the EPR Guidance document in 2020: the guidance defines the roles and responsibilities of the key public and private stakeholders, the product categories to be covered by the EPR scheme, and the collection and recycling targets.
• The amendment of the National Environmental (Electrical and Electronic Sector) Regulations in 2022: which legally requires EPR subscriptions and prohibits suboptimal treatment of e-waste.

The study concludes with a summary of key lessons and next steps, emphasizing the importance of enforcing EPR laws, engaging stakeholders, raising public awareness, and collaborating with regional and international partners.

The establishment of an EPR database is critical in operationalising and formalising the management of EPR-related data. The EPR database allows e-waste flow tracking and EPR fee and recovery rate calculation while ensuring producers' information confidentiality and helping prevent counterfeiting activities.

The case study outlines the project’s efforts towards establishing this automation system in Nigeria in the following areas:

• Developing the EPR database: to manage producers’ market share data, calculate and collect the EPR fees.
• Registering Producers and products in the database: To ensure electronic and electrical producers are registered and to oversee the EPR operation.
• Securing the database: Enhancing producers' trust in the database and ensuring its confidentiality.

The study concludes with a summary of next steps and key learnings, emphasizing the importance of law enforcement, database registration, secure systems for producers, and encouraging the participation of producers in the database registration.