Library

This document summarises lessons learned from the various project activities in three sectors: electrical and electronic equipment (EEE); building and construction; and toys. It also formulates key messages addressed to different stakeholder groups and provides links to guidance and tools developed under the GEF project

Factsheet with UNEP tools to address lead in paint

Safer Consumer Products (SCP) has compiled a list of alternatives to PFASs in carpets and rugs to assist manufacturers looking for substitutes. The alternatives have been grouped into two categories: non-chemical and chemical alternatives. Products and manufacturers are listed but they are not endorsed by SCP and the safety of the alternatives has not been assessed.

This study aims to predict human exposure to pollutants and heating load in buildings by developing a numerical model coupling heat and chemical transfers in the building envelope. The study characterizes the effect of temperature and air renewal rate on chemical emissions from building materials and human exposure. The results show that increasing indoor temperature by 10°C doubles the maximum indoor air concentration of volatile and semi-volatile organic compounds, leading to increased human exposure. The study also finds that higher air renewal rates lead to smaller intake fractions of pollutants from building materials. The study highlights the need to guide early design choices towards a good compromise between human indoor exposure and heating load, especially with the increasing emphasis on energy-efficient building design.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

Chemical management and risk assessment frameworks rely on regulatory toxicity values, but these are available for only a small fraction of commercialized chemicals due to limited available data. To address this gap, the study aims to expand the coverage of chemicals for which toxicity values can be derived by determining surrogate inhalation route points of departure (PODs) and corresponding toxicity values where regulatory assessments are lacking. In vivo data from the U.S. EPA's Toxicity Value Database were curated and selected, and effect values were adjusted to chronic human equivalent benchmark concentrations (BMC_h) using the WHO/IPCS framework. Chemical-specific PODs are crucial for evaluating potential risks and toxicological impacts from chemical exposures, and the statistically derived BMCL or LOAEC/NOAEC are typically used as candidate PODs for toxicity value derivation.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

The study examines the near-field exposures and health risks of organic chemicals in interior paints commonly used in Sri Lanka. The researchers developed mass balance-based and high-throughput models to predict chemical emissions during wet and dry phases and integrated these models into the USEtox model for health risk assessment. The models accurately predicted indoor air concentrations and drying time. They found that inhalation is the primary exposure pathway, and exposure is much higher for painters during application than for household members during use. The study identified chemicals of concern and recommended the use of protective equipment for painters and increasing air ventilation rates to reduce exposure for household members.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

Over half a million tonnes of discarded electronic appliances are improperly processed in Nigeria every year, threatening the country's environment and the health of approximately 100,000 informal workers in the recycling industry.
With support from the Global Environment Facility (GEF), the Government of Nigeria has joined forces with the United Nations Environment Programme (UNEP) and partners to turn the tide on e-waste under the “Circular Economy Approaches for the Electronics Sector in Nigeria” project. Led by UNEP and supported by the National Environmental Standards and Regulations Enforcement Agency of Nigeria (NESREA), the $15-million initiative brought together players from the Government, the private sector, and civil society to design and operationalise a financially self-sustaining circular economy (CE) for electronics in Nigeria.
The project aims to stimulate a CE pilot through an Extended Producer Responsibility (EPR) scheme that serves as a model for countries facing similar challenges. EPR is an integrated waste management approach that extends the responsibility of manufacturers to the entire lifecycle of their product, particularly to the end-of-life treatment. By applying this approach, the producers will be obliged to commission for collecting, pre-treating and recycling their originated e-waste. 
The project creates synergies among pre-existing elements of an EPR system in Nigeria to establish a sustainable management system and financing mechanism for EPR implementation. Establishing and enforcing a sustainable approach in Nigeria with supporting regulations and legally binding requirements is expected to recover and re-introduce usable materials into the value chain, dispose of hazardous e-waste streams in an environmentally sound manner, and create safe employment for Nigerian e-waste workers.
 

In January 2019, the California Building Standards Commission unanimously approved changes to the state building codes proposed by the California Office of the State Fire Marshal. The changes allow use of polystyrene insulation without flame retardants below a concrete slab-on-grade. These changes would maintain fire safety while improving human and environmental health.  This fact sheet details the key considerations for implementation of a policy on allowing flame retardant-free insulation within a building code, and the associated health and technical considerations.