84 resources found

Case Study 3
Case studies

Piloting the Extended Producer Responsibility scheme in Nigeria

This case study highlights three main achievements resulting from the EPR pilot that tested potential collection channels, determined local e-waste treatment costs, and promoted environmentally sound e-waste management and gender equality in Nigeria's electronics sector.

  1. Setting an EPR financial mechanism by understanding local collection and recycling costs and estimating the EPR fee based on local costs.
  2. Reducing the health and environmental risks associated with e-waste management practices by ensuring hazardous materials like mercury and Persistent Organic Pollutants in e-waste are recycled in an environmentally sound manner.
  3. Improving the health, security, and safety of waste management workers, including women who face various risks in the sector.

The study concludes with a summary of the next steps and key learnings that emphasize the importance of environ-mentally and socially responsible e-waste management with a focus on gender equality in the sector.

European Commission GPP
Case studies

Procuring sustainable furniture in Denmark - GPP in practice

A case study as part of the European Commission's Green Public Procurement resources.  This example from Denmark shows how by using an overarching, centralised procurement strategy across more than 60 municipalities, the Danish government were able to address sustainability hotspots from wooden furniture, by bulk procurement of products that met ambitious sustainability criteria.

The bulk sourcing enabled cost savings, and criteria set ensured that furniture did not contain chemicals of concern identified by both Danish restricted substance lists and the REACH list of substances of very high concern (SVHC).  Products were required to meet higher standards of chemical safety, with dismantling criteria also set to improve circularity.

Factsheets and brochures

Potential Alternatives to PFASs in Carpets and Rugs

Safer Consumer Products (SCP) has compiled a list of alternatives to PFASs in carpets and rugs to assist manufacturers looking for substitutes. The alternatives have been grouped into two categories: non-chemical and chemical alternatives. Products and manufacturers are listed but they are not endorsed by SCP and the safety of the alternatives has not been assessed.

Emerging Policy Issues: Perfluorinated Chemicals
Biomimicry Case Study - PureBond® Technology: Wood glue without formaldehyde
Case studies

Biomimicry Case Study - PureBond® Technology: Wood glue without formaldehyde

In recent years the majority of glues used in wood composite boards have been urea-formaldehyde (UF) and phenol-formaldehyde (PF) resins.  However, these products may cause human health issues due to off-gassing of formaldehyde, which is recognised by the World Health Organisation as a potential human carcinogen, which can also cause irritation of the eyes, nose, lungs and throat.

However, development of no-added formaldehyde (NAF) glues and resins is a growing area, which not only provide a safer indoor environment, but also can reduce the use of fossil-based feedstocks, and are biodegradable.  This case study looks at how NAF adhesives based on abundant soybean feedstocks, taking inspiration from processes in nature can address this chemical hotspot, and how the product was intially researched by Dr. Kaichang Li of Oregon State university, and came to market through collaborations with Columbia Forest Products and Hercules.  Soy-based adhesives can now demonstrate cost-competitiveness with UF adhesives, and are being widely procured for buildings seeking to achieve complaince with air quality regulations and higher building rating scores.

EU Chemicals Strategy for Sustainability
Policy document

EU Chemicals Strategy for Sustainability

Chemicals are essential for the well-being, high living standards and comfort of modern society. They are used in many sectors, including health, energy, mobility and housing.

However, most chemicals have hazardous properties which can harm the environment and human health.

The EU already has sophisticated chemicals laws in place, but global chemicals production is expected to double by 2030. The already widespread use of chemicals will also increase, including in consumer products.

The European Commission published a chemicals strategy for sustainability on 14 October 2020. It is part of the EU’s zero pollution ambition, which is a key commitment of the European Green Deal.

Circular_Economy_Electronics_LAC
Report

Toward a Circular Economy for the Electronics Sector in Latin America and the Caribbean (LAC): Overview, Actions and Recommendations

This report provides an overview of the current status and conditions of the Circular Economy in the electronics value chain in the Latin America and the Caribbean (LAC) region, identifies key areas of concern, provides appropriate recommendations, and proposes priority actions to improve circularity of the sector. The recommendations and roadmap focus on the individual life cycle stages of the electronics value chain, as well as on aspects that cut across the value chain. The transition towards a more circular electronics sector in Latin America and the Caribbean (LAC) would require a holistic and coordinated approach to progress toward a more circular electronics value chain in the CEE region.

This publication was prepared under the framework of the Global Environment Facility (GEF) full-sized project 9771: Global best practices on emerging chemical policy issues of concern under the Strategic Approach to International Chemicals Management (SAICM). This project is funded by the GEF, implemented by UNEP and executed by the SAICM Secretariat.

SAICM-USEtox_D8.1-Paper3-preprint
Academic article

Coupled mass and heat transfer modeling in building envelopes to consistently assess human exposure and energy performance in indoor environments

This study aims to predict human exposure to pollutants and heating load in buildings by developing a numerical model coupling heat and chemical transfers in the building envelope. The study characterizes the effect of temperature and air renewal rate on chemical emissions from building materials and human exposure. The results show that increasing indoor temperature by 10°C doubles the maximum indoor air concentration of volatile and semi-volatile organic compounds, leading to increased human exposure. The study also finds that higher air renewal rates lead to smaller intake fractions of pollutants from building materials. The study highlights the need to guide early design choices towards a good compromise between human indoor exposure and heating load, especially with the increasing emphasis on energy-efficient building design.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

Emerging Policy Issues: Chemicals in products
SAICM-USEtox_D8.1-Paper5-preprint
Academic article

Probabilistic reference and 10% effect concentrations for characterizing inhalation non-cancer and development/reproductive effects for 2,160 substances

Chemical management and risk assessment frameworks rely on regulatory toxicity values, but these are available for only a small fraction of commercialized chemicals due to limited available data. To address this gap, the study aims to expand the coverage of chemicals for which toxicity values can be derived by determining surrogate inhalation route points of departure (PODs) and corresponding toxicity values where regulatory assessments are lacking. In vivo data from the U.S. EPA's Toxicity Value Database were curated and selected, and effect values were adjusted to chronic human equivalent benchmark concentrations (BMCh) using the WHO/IPCS framework. Chemical-specific PODs are crucial for evaluating potential risks and toxicological impacts from chemical exposures, and the statistically derived BMCL or LOAEC/NOAEC are typically used as candidate PODs for toxicity value derivation.

This is a pre-print manuscript pending publication in open access scientific journals.

This document has been developed within the framework of the Global Environment Facility (GEF) project ID: 9771 on Global Best Practices on Emerging Chemical Policy Issues of Concern under the Strategic Approach to International Chemicals Management (SAICM).

Emerging Policy Issues: Chemicals in products
Avatar